Take your 3D Printing to the next level. The Advanced Coating Technology in EZ-Stik Hot provides maximum adhesion when heated to prevent warping and easy part removal when cooled. Simple cut your EZ-Stik surface to size with standard scissors then use the peel and stick adhesive backing to attach to your build platform. Work with ABS, PLA, PETG, Nylon, Composites and more!
EZ-Stik Hot
Eliminate Warping
We know how frustrating it is when the corners lift, or when parts come off. EZ-Stik’s Advanced Coating Technology is designed to reliably prevent peeling. No need for a raft or to ‘squish’ the first layer. Print even the most difficult parts up to 8 inches long with no peeling.
Easy Part Removal
We designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. We recommend using our non-scratching removal tool for the most difficult parts.
Lasts Over 100 Prints
Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. Exact life span varies depending on the materials, settings, and 3D printer. Many customers get over 300 prints on a single sheet.
Improved Durability
Even though EZ-Stik uses a polymer sheet, it is still very durable. It easily resists light scratches by the nozzle.
Maintenance and CleaningThere is almost no maintenance needed for GeckoTek Build Surfaces. We recommend that you wipe the surface with isopropyl alcohol wipes every 5-10 prints.
Please note: If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.
If using optical bed leveling may have issues detecting the GeckoTek print surface; thus decreasing accuracy of the bed leveling. Please ensure compatability before making a purchase!
GeckoTek EZ-Stik Print Surfaces:
All unused, undamaged, unopened print surface in its original packaging is eligible for a full refund within 30 days, although the customer is responsible for any return shipping. Any used or opened material will not be eligible for a return or refund.Please contact Storme Technologies for any questions or to obtain an RMA number.
Shipping cost added to order at Checkout.
- If using Ninjaflex, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.
- If you are using optical bed leveling on the printer, you may have issues detecting the GeckoTek print surface; thus decreasing accuracy of the bed leveling sequence. Please ensure compatability before making a purchase.
